Talaria XXX Graphics kit Fitting Guide

Sticker FX Graphics Kit Fitting Guide (video link at bottom)

Thank you for choosing Sticker FX Graphics for your off-road vehicle graphics. To ensure a seamless and professional installation, please follow our step-by-step fitting guide below:

  1. Surface Preparation:

    • Thoroughly clean the surface where the graphics will be applied using a mild detergent and water.

    • Remove any dirt, grease, or debris that may hinder proper adhesion.

    • Dry the surface completely before proceeding.

  2. Test Fit:

    • Before removing the backing paper, hold the graphics up to the desired position on your vehicle.

    • Make any necessary adjustments to align the graphics with the contours and features of your vehicle.

    • Take your time to ensure the perfect placement and symmetry.

  3. Application:

    • Once you're satisfied with the positioning, peel a small portion of the backing paper away from the graphics.

    • Align that exposed edge with the desired location on your vehicle.

    • Gradually and evenly peel away the backing paper while applying firm, even pressure to adhere the graphics to the surface.

    • Use a squeegee or similar tool to smooth out the graphics and remove any air bubbles.

  4. Contouring:

    • As you continue applying the graphics, be mindful of the curves, edges, and contours of your vehicle.

    • Gently stretch or heat the graphics with a heat gun or hairdryer if needed to ensure proper adhesion around curves and edges.

    • Take extra care when working on complex or intricate areas to maintain the integrity of the design.

  5. Finishing Touches:

    • Once all the graphics are applied, go over the entire surface again with a squeegee or soft cloth to ensure optimal adhesion and eliminate any remaining air bubbles.

    • Pay attention to corners, edges, and fine details, ensuring they are securely adhered.

    • For maximum longevity, you can apply heat evenly over the entire graphics kit using a heat gun or hairdryer to activate the adhesive.

Remember, patience and attention to detail are key to achieving a professional result. If you encounter any difficulties during the fitting process, please don't hesitate to reach out to our customer support for assistance.

Now that you have successfully fitted your Sticker FX Graphics kit, stand back and admire the transformation of your off-road vehicle. Get ready to hit the trails with style and turn heads wherever you go!

For more tips, maintenance advice, and updates on our latest designs, be sure to subscribe to our YouTube channel and follow us on social media.

Thank you for choosing Sticker FX Graphics. Ride in style and let your creativity shine!

View our sticker kit fitting video here https://youtu.be/GZfUOOeRrEQ